Keyless Receiver Inspection [Keyless Entry System]: Notes
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
- Measure the voltage according to the terminal voltage table.
- If the voltages cannot be verified as indicated in the terminal voltage table, inspect the parts under "Inspection item (s)".
- If the system does not work normally even though the parts or related wiring harnesses do not have any malfunction, replace the keyless receiver
- If the voltages cannot be verified as indicated in the terminal voltage table, inspect the parts under "Inspection item (s)".
- Disconnect the negative battery cable.