Advanced Keyless Entry And Push Button Start System
WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the CUSTOMIZED FUNCTION SETTING PROCEDURE.
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming"
- Then, select items from the screen menu in the following order.
- Select "Programmable Parameters"
- Select "RKE"
- Select the item name, and then select option.
PERSONALIZATION FEATURES
| Mazda Modular Diagnostic System (M-MDS) display | Function | Initial setting | Setting content | Control unit |
|---|---|---|---|---|
| Advanced Keyless Function | Advanced keyless entry and push button start system function can be set to inoperable. | Enabled | Disabled/ Enabled | Keyless control module |
| 2 stage door unlocking (with SKE) | 2-step unlocking system can be set. | Touch sensor driver door unlock only | Touch sensor all door unlock only/Touch sensor driver door unlock only/Touch sensor disabled/ Touch sensor & Request switch | Keyless control module |
| Prevention Function of Key Containment in Trunk or Liftgate | Key-left-in-trunk prevention function can be set. | Disabled | Disabled/ Enabled | Keyless control module |
| Auto Lock | Auto lock function can be set. | Disabled | Disabled/ Enabled | Keyless control module |
| Advanced Key Battery Low Warning | Advanced key remaining battery level/battery dead warning can be set. | Enabled | Disabled/ Enabled | Keyless control module |
| Answer Back Buzzer Volume | Volume adjustment of the answer back buzzer can be set. | 10 | Disabled/5-10 | Keyless control module |
| Warning Buzzer Volume | Volume adjustment of the warning buzzer can be set | 10 | 5-10 | Keyless control module |