Theft-Deterrent System Reading Freeze Frame Data

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the READING FREEZE FRAME DATA.

Connect the M-MDS to the DLC-2.

Fig 1: Identifying DLC-2 Connector

Courtesy of MAZDA MOTORS CORP.

After the vehicle is identified, select the following items from the initialization screen of the M-MDS
- When using the IDS (laptop PC)
  1. Select "Body".
  2. Select "Burglar Service Functions".
Then, select the following item from the screen menu.
1. Select "Read FFD".
Read the record according to the directions on the screen.