LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2012 >> 6 s Touring Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 600 (Power Steering System) >> Steering Wheel And Column Removal/Installation [With Advanced Keyless Entry And Push Button Start System] >> Steering Shaft Component Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Shaft Component Installation Note

WARNING: This page is about a different car, the 2009 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not unlock the adjusting lever until after the steering shaft installation is completed to prevent damage to the steering shaft.
  1. Verify that the adjusting lever is in the LOCK position.
  2. Temporarily install the steering shaft component to the dashboard member using nuts A and B.
  3. Tighten the nuts in the order of nut A and nut B.
    Fig 1: Identifying Steering Shaft Component Nuts Tightening Sequence
    G06200211Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals