Intake Air Temperature (IAT) Sensor Inspection: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
- The MAF sensor and IAT sensor cannot be removed as a single unit. When replacing the MAF sensor or IAT sensor, replace it together with the MAF/IAT sensor as a single unit.
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.5] .)
- Disconnect the MAF/IAT sensor connector.
- Measure the resistance between MAF/IAT sensor terminals D and E.
- If not as specified, replace the MAF/IAT sensor. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)