Body Control Module (BCM) Inspection: Notes
- Remove the dashboard under cover. (See
DASHBOARD UNDER COVER REMOVAL/INSTALLATION
).
- Remove the glove compartment. (See
GLOVE COMPARTMENT REMOVAL/INSTALLATION
).
- Measure the voltage at each terminal and inspect for the continuity between the terminals and ground is as indicated in the Terminal Voltage Tables (Reference).
- If the voltage or continuity is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item (s)".
- If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the BCM.