LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 2 Touring, 1.5L Eng VIN Z, Automatic Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection >> Driver Side
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver Side

  1. Switch the ignition to off.
  2. Disconnect the negative battery cable.
  3. Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION ).
  4. Remove the front buckle. (See FRONT BUCKLE REMOVAL/INSTALLATION ).
  5. Inspect for continuity between the buckle switch terminals using a tester.
    • If not as indicated in the table, replace the front buckle.
      Fig 1: Buckle Switch Continuity Reference Chart
      G04860854
      Fig 2: Checking Continuity Between Buckle Switch Terminals
      G09133047
scientia non olet · About LEMON Manuals