LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2013 >> 3 Mazdaspeed, 2.3L Eng VIN 4 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (MZR 2.3 DISI Turbo) >> Camshaft Position (CMP) Sensor Inspection >> Visual Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Visual Inspection

CAUTION:
  • When replacing the CMP sensor, make sure there is no foreign material on it such as metal shavings. If it is installed with foreign material, the sensor output signal will malfunction resulting from fluctuation in magnetic flux and cause a deterioration in engine control.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .)
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI TURBO] .)
  3. Remove the charge air cooler cover. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  4. Disconnect the CMP sensor connector.
  5. Remove the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION .)
  6. Verify that there are no metal shavings on the CMP sensor.
    • Remove any metal shavings that are adhering.
scientia non olet · About LEMON Manuals