Remote Transmitter Disassembly/Assembly: Assembly

Verify that the O-ring is installed to the remote transmitter.
NOTE:
- If the O-ring is removed, install it before installing the battery.
Fig 1: Identifying O-Ring And Transmitter
Install a new battery (CR2025) in the direction of the arrow shown in the figure with the negative pole facing down.
Install the cap.

Fig 2: Installing Battery And Cap
Align the cover to the transmitter from its end and press it in the direction of the arrow shown in the figure to engage the tabs of the cover with the remote transmitter.

Fig 3: Engaging Tabs Of Cover With Remote Transmitter
Insert the auxiliary key.

Fig 4: Inserting Auxiliary Key