Mass Air Flow (MAF) Sensor/Intake Air Temperature (IAT) Sensor No.1 Removal/Installation
NOTE:
- Because the IAT sensor No.1 is integrated in the MAF sensor, replacing the IAT sensor No.1 includes replacement of the MAF sensor/IAT sensor No.1.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0] ).
- Disconnect the MAF sensor/IAT sensor No.1 connector.
- Remove the MAF sensor/IAT sensor No.1.
- Install in the reverse order of removal.