Auto wiper system (Using M-MDS)
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the R_BCM.
- Select an item name, and then select option.
| M-MDS display | Function | Initial setting | Setting contents | Control unit |
|---|---|---|---|---|
| Rain Sensing Wipers. | Auto wiper system can be set to operable or inoperable. | On (Rein Sensing) | Not Adopted./Off (Intermittent)/On (Rein Sensing) | Rear body control module (RBCM) |