LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2014 >> 3 SV, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Controls (5 Of 6) >> DTC P2096 00, P2097 00: Ho2S Fuel Injection Control System >> Repeatability Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repeatability Verification Procedure

  1. Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more. 
  2. Shift to 3rd gear and drive the vehicle for 20 min  at an engine speed of 1, 500 rpm or more  and a vehicle speed of 50 km/h {31 mph} or more  .
    NOTE:
    • Match the engine coolant temperature in the recorded FREEZE FRAME DATA (Mode 2)/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
  3. Try to reproduce the malfunction by driving the vehicle for 5 min based on the values in the FREEZE FRAME DATA (Mode 2)/snapshot data.
scientia non olet · About LEMON Manuals