No. 3 Start stop unit replacement and programming procedure due to simultaneous replacement of start stop unit/PCM: Notes
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- The engine cannot be started if any step or procedure is skipped. Perform all procedures in the order of the steps.
- Because it is necessary to program two or more remote transmitters to the immobilizer system-related parts to start the engine, perform the remote transmitter programming after clearing the remote transmitter.
NOTE:
- Before beginning the procedure, verify that the customer has provided all of the remote transmitters for the vehicle.
- The engine cannot be started unless two or more remote transmitters are programmed after the replacement.