April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using M-MDS

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to DLC-2.
After the vehicle is identified, select the following items from the initial screen of the M-MDS.
1. Select the "Module Programming".
2. Select "Programmable Parameters".
Select menu in the SSU.

Select an item name, and then select option.

M-MDS display	Function	Initial setting	Setting contents	Control unit
Unlock Mode (Without Touch Sensor)	2-step unlocking system can be set.	Once:Driver's, Twice: All Doors.	Not Adopted./Touch Once: All Doors./Once:Driver's, Twice: All Doors.	Start stop unit

For the auto door lock function, refer to the personalization features for the RBCM. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE .)