Brake Pipe Installation Note

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Align the marks made before removal and install the brake pipe to the DSC HU/CM and brake pipe joint referring to the figure.
Vehicles without Mazda Radar Cruise Control (MRCC) system and Smart City Brake Support (SCBS)

Fig 1: Identifying Brake Pipe Flare Nut And Master Cylinder (Vehicles Without MRCC System)
Courtesy of MAZDA MOTORS CORP.

Vehicles with Mazda Radar Cruise Control (MRCC) system or Smart City Brake Support (SCBS)
Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.

Fig 2: Identifying Brake Pipe Flare Nut And Master Cylinder (Vehicles With MRCC System)
Courtesy of MAZDA MOTORS CORP.