Sunroof System Initialization Procedure
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- If the following operations have been performed, the initial setting is reset, and operations except for tilt up are disabled. Therefore, performing initial setting is necessary.
- Negative battery cable is disconnected. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
- Sunroof switch connector is disconnected.
- Sunroof system power supply fuse is removed.
- Switch the ignition ON (engine off or on).
- Press the tilt up switch to fully tilt up the glass panel.