Service Caution: Disassembly

Clean the outside of the transaxle using steam and/or degreaser before disassembly.
To prevent dust penetration into the transaxle, perform the disassembly in a dust free environment.
Clean the disassembled parts using degreaser and dry them using compressed air.
Clean the oil holes and oil grooves using compressed air and verify that they are not plugged.
Always wear protective eye wear when using compressed air.
When disassembling a connecting part of a light-alloy part for the transaxle case, use a plastic hammer.
Organize and store the disassembled parts to protect them from dirt.
If using a vise, always secure the component using an aluminum plate to prevent component damage.
Disassemble while verifying damage, cracks, deformation, scratches, and the assembly condition of each part.