Front Wheel Alignment: Notes
Front wheel alignment [16-inch wheel]
ITEM SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Total toe-in | Tire [Tolerance ±4 mm {0.15 in}] | (mm {in}) | 1.6 {0.063} |
| Rim inner | (mm {in}) | 1.1 ±2.6 {0.04±0.10} | |
| degree | 0°09'+22' | ||
| Steering angle [Tolerance ±3°] | Inner | 38°42' | |
| Outer | 32°54' | ||
| Steering axis inclination (Reference value) | 10°57' | ||
| Camber [Tolerance ±1°] | Vehicle height: From the end of the front fender to the center of the wheel (mm {in}) | 356-365 {14.1-14.3} | -0°34' |
| 366-375 {14.5-14.7} | -0°19' | ||
| 376-385 {14.8-15.1} | -0°07' | ||
| 386-395 {15.2-15.5} | 0°04' | ||
| 396-405 {15.6-15.9} | 0°12' | ||
| Caster [Tolerance ±1°] | Vehicle height: From the end of the rear fender to the center of the wheel (mm {in}) | 354-363 {14.0-14.2} | 6°32' |
| 364-373 {14.4-14.6} | 6°17' | ||
| 374-383 {14.8-15.0} | 6°02' | ||
| 384-393 {15.2-15.4} | 5°47' | ||
| 394-403 {15.6-15.8} | 5°32' | ||
Front wheel alignment [17-inch wheel]
ITEM SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Total toe-in | Tire (Tolerance ±4 mm {0.15 in}] | (mm {in}) | 1.6 {0.063} |
| Rim inner | (mm {in}) | 1.1±2.8 {0.04±0.11} | |
| degree | 0°09'±22' | ||
| Steering angle [Tolerance ±3°] | Inner | 38°42' | |
| Outer | 32°54' | ||
| Steering axis inclination (Reference value) | 11°04' | ||
| Camber [Tolerance ±1°] | Vehicle height: From the end of the front fender to the center of the wheel (mm {in}) | 351-360 {13.8-14.1} | -0°42' |
| 361-370 {14.3-14.5} | -0°26' | ||
| 371-380 {14.7-14.9} | -0°13' | ||
| 381-390 {15.0-15.3} | -0°01' | ||
| 391-400 {15.4-15.7} | 0°08' | ||
| Caster [Tolerance ±1°] | Vehicle height: From the end of the rear fender to the center of the wheel (mm {in}) | 349-358 {13.8-14.0} | 6°40' |
| 359-368 {14.2-14.4} | 6°25' | ||
| 369-378 {14.6-14.8} | 6°10' | ||
| 379-388 {15.0-15.2} | 5°55' | ||
| 389-398 {15.4-15.6} | 5°40' | ||
NOTE:
- Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
- Difference between the left and right dimension for camber and caster is within 1°.