| DTC_CNT |
- |
Displays number of DTCs stored in the BSM control module (LH) |
- |
| IL_MODE |
Off/On |
- Off: BSM OFF indicator light is illuminated in night mode.
- On: BSM OFF indicator light is illuminated in daytime mode.
|
C, D (CAN) |
| RCTA_BUZZER |
Off/On |
- Off: RCTA warning alarm does not sound.
- On: RCTA warning alarm sounds.
|
C, D (CAN) |
| RCTA_OFF_IL |
Off/On |
- Off: BSM OFF indicator light is not illuminated.
- On: BSM OFF indicator light is illuminated.
|
C, D (CAN) |
| RCTA_WARN |
Off/On |
- Off: BSM indicator lights are not illuminated.
- On: BSM indicator lights are illuminated.
|
C, D (CAN) |
| SHIFT_R |
Not_R/R |
ATX
- Not_R: Selector lever is in position other than R.
- R: Selector lever is in R position.
MTX
- Not_R: Shift lever is in position other than reverse.
- R: Shift lever is in reverse position.
|
C, D (CAN) |
| SWA_POS |
° (deg) |
Displays steering angle signal (estimated absolute angle)
- Steering wheel in neutral position: Near 0 degrees
- Steering wheel turned to left: Changes from 0 degrees
to positive
- Steering wheel turned to right: Changes from 0 degrees
to negative
|
C, D (CAN) |
| VPWR_IG1 |
V |
Displays BSM control module (LH) power supply voltage |
I (Power supply) |
| VSPD |
KPH, MPH |
Displays vehicle speed |
C, D (CAN) |
| WRN_IND_L |
Off/On |
- Off: BSM indicator light (LH) is not illuminated.
- On: BSM indicator light (LH) is illuminated.
|
- G (BSM indicator light (LH) signal)
- J (Ground)
|