Selection of Procedure for Immobilizer System-Related Parts Programming

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Verify that the ROOM fuse, AT fuse, and SRS2/ESCL fuse are installed.

Select the applicable programming procedure from the service content of the immobilizer system-related parts.

IMMOBILIZER SYSTEM-RELATED PARTS SERVICE AND PROGRAMMING PROCEDURE

No.	Service		Programming procedure
1	Additional remote transmitter programming	Have remote transmitter that can start engine	(See NO. 1 ADDITIONAL REMOTE TRANSMITTER PROGRAMMING PROCEDURE (USING THE M-MDS) .)
2	Programming due to PCM replacement		(See NO. 2 PROGRAMMING PROCEDURE AFTER PCM REPLACEMENT .)
3	Start stop unit replacement and programming due to simultaneous replacement of start stop unit/PCM		(See NO. 3 START STOP UNIT REPLACEMENT AND PROGRAMMING PROCEDURE DUE TO SIMULTANEOUS REPLACEMENT OF START STOP UNIT/PCM .)
4	Remote transmitter replacement or clearing		(See NO. 4 REMOTE TRANSMITTER REPLACEMENT OR REMOTE TRANSMITTER CLEARING .)