LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> 3 SV, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle Shift Mechanism) >> Automatic Transaxle Shift Mechanism Removal/Installation >> Selector Cable (Selector Lever Side) Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Cable (Selector Lever Side) Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Verify that the selector lever is in the P position.
  2. Verify that the manual shaft is in the P position.
    Fig 1: Setting Manual Shaft To P Position
    G09771255Courtesy of MAZDA MOTORS CORP.
  3. Press in the lock piece in the direction of the arrow (1) shown in the figure, press in the safety lock in the direction of the arrow (2) shown in the figure, and lock it.
    Fig 2: Removing Selector Cable (Selector Lever Side)
    G09771256Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals