Front Accessory Socket Inspection

WARNING: This page is about a different car, the 2013 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front accessory socket. (See FRONT ACCESSORY SOCKET REMOVAL/INSTALLATION ).
Connect the tester probe to the position shown in the figure and verify that there is continuity.
- If it cannot be verified, replace the front accessory socket. (See FRONT ACCESSORY SOCKET REMOVAL/INSTALLATION ).
  
  Fig 1: Connecting Tester Probe To Front Accessory Socket
  Courtesy of MAZDA MOTORS CORP.