Keyless Control Module Configuration

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- When using the IDS (laptop PC)
  - Select "Module Programming".
- When using the PDS (Pocket PC)
  - Select "Programming".
  - Select "Module Programming".
Then, select the "Programmable Module Installation" and "RKE" from the screen menu.
Perform the configuration according to the directions on the screen.

Fig 1: DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
Retrieve DTCs using the M-MDS, then verify if DTCs are present.
- If a DTC is present, perform the applicable DTC inspection. (See DTC TABLE [ADVANCED KEYLESS AND START SYSTEM] )