LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2015 >> MX-5 Miata Club, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Neutral Switch Inspection >> Continuity Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Continuity Inspection

  1. Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ). (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
  2. Verify that the continuity between neutral switch terminals 1A and 2A is as indicated in the table in figure.
    • If not as indicated in the table in figure, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION ). (See NEUTRAL SWITCH REMOVAL/INSTALLATION ).
    • If the monitor item condition/specification (reference) is not within the specification, even though there is no malfunction, perform the "Circuit Open/Short Inspection".
      Fig 1: Neutral Switch Continuity Chart
      G07877769Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals