CMDTC Self Test
- Connect the M-MDS to the DLC-2.
- After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
- Select "Self Test".
- Select "All CMDTCs".
- Verify the DTC according to the directions on the screen.
- Press the clear button on the DTC screen to clear the DTC.
- Switch the ignition to off.
- Switch the ignition ON (engine off or on) and wait for 5 s or more .
- Perform DTC inspection. (Refer to DTC INSPECTION [VEHICLE CONTROL MODULE (V/C-MODULE)] .)
- Verify that no DTCs are displayed.