Function Inspection Using M-MDS

STEP	INSPECTION	RESULTS	ACTION
1	VERIFY RELATED REPAIR INFORMATION AVAILABILITY Verify related Service Bulletins and/or on-line repair information availability. Is any related repair information available?	Yes	Perform repair or diagnosis according to the available repair information. If the vehicle is not repaired, go to the next step.
1		No	Go to the next step.
2	PURPOSE: VERIFY IF POWER SUPPLY IS AFFECTED BY DTC RELATED TO DC-DC CONVERTER Switch the ignition off, then ON (engine off). Perform the DC-DC converter DTC inspection using the M-MDS. (Refer to DTC INSPECTION [i-ELOOP] .) Are any DTCs present?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (Refer to DTC TABLE [i-ELOOP] .) Go to the next step.
2		No	Go to the next step.
3	PURPOSE: VERIFY IF BATTERY VOLTAGE IS FALSELY RECOGNIZED BY DTC RELATED CURRENT SENSOR Perform the Pending Trouble Code Access Procedure and DTC Reading Procedure. (Refer to ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .) Is the PENDING CODE/DTC P058A:00 also present?	Yes	Go to the applicable PENDING CODE or DTC inspection. (Refer to DTC P058A:00 [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .) Go to the next step.
3		No	Go to the next step.
4	PURPOSE: VERIFY IF BATTERY VOLTAGE IS FALSELY RECOGNIZED BY DTC RELATED CAN OR LIN COMMUNICATION Perform the PCM and front body control module (FBCM) DTC inspection using the M-MDS. (Refer to ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .) (Refer to DTC INSPECTION [FRONT BODY CONTROL MODULE (FBCM)] .) Are DTCs related CAN or LIN communication recorded?	Yes	Repair or replace the malfunctioning part according to the applicable DTC troubleshooting. (Refer to DTC TABLE [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .) (Refer to DTC TABLE [FRONT BODY CONTROL MODULE (FBCM)] .) Go to the next troubleshooting procedure to perform the procedure from step 1.
4		No	Go to the next troubleshooting procedure to perform the procedure from step 1.