| DETECTION CONDITION |
- Under the following conditions, the ATF temperature is 40 °C {104 °F} or less
:
- Certain period has elapsed since engine start.
- ECU internal temperature sensor related DTC is not recorded.
- Soaked for 6 hours or more
.
- ECU internal temperature is 60 °C {140 °F} or more
.
- Under the following conditions, the ATF temperature is 120 °C {248 °F} or more
:
- Certain period has elapsed since engine start.
- ECU internal temperature sensor related DTC is not recorded.
- Soaked for 6 hours or more
.
- ECU internal temperature is 95 °C {203 °F} or less
.
Diagnostic support note
- The check engine light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition in two consecutive drive cycles or in one drive cycle while the DTC for the same malfunction has been stored in the TCM.
- PENDING CODE is available.
- FREEZE FRAME DATA is available.
- DTC is stored in the TCM memory.
|