| System malfunction location |
MRCC system initialization not implemented |
| Detection condition |
- The initial setting for yaw rate information is not performed after replacing the SAS control module.
NOTE:
- If the ignition is switched off when an error occurs during the system initialization command execution, a DTC is detected indicating that the system initialization was not performed.
|
| Fail-safe |
- Inhibits the Mazda radar cruise control (MRCC) system control
- Inhibits the forward obstruction warning (FOW) system control
|
| Possible cause |
- MRCC system initialization not performed after replacing SAS control module
- SAS control module malfunction
- Vehicle control module (V/C-module) malfunction
|
| System wiring diagram |
|