| INFO switch input signal |
1 |
INFO switch is pressed |
 Courtesy of MAZDA MOTORS CORP.
|
The input signal is normal.
Go to the next step. |
 Courtesy of MAZDA MOTORS CORP.
|
Go to the next step. |
| 2 |
INFO switch is released |
 Courtesy of MAZDA MOTORS CORP.
|
Go to the next step. |
 Courtesy of MAZDA MOTORS CORP.
|
The input signal to the information display is normal. |
| 3 |
Inspect the steering switch.
- Measure the resistance between steering switch terminal K and M. (See STEERING SWITCH INSPECTION
.)
- Can the resistance be measured?
|
Yes |
- Replace the information display.
|
| No |
- Inspect for an open or short circuit in the steering switch related wiring harness, poor connection or terminal disconnection of the connector.
- If there is any malfunction, repair or replace the malfunctioning location.
|