DTC P060C-00, P061D-00: Internal Control Module Performance Problem: Notes

DTC P060C:00, P061D:00 DETECTION CONDITION AND POSSIBLE CAUSE

DTC P060C:00	Internal control module main processor performance problem
DTC P061D:00	Internal control module engine air mass performance problem
DETECTION CONDITION	Indicates an error occurred in the PCM. Diagnostic support note This is a continuous monitor (CCM). The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. The DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION	The engine output is restricted.
POSSIBLE CAUSE	PCM connector or terminals malfunction Software incompatibility issue PCM malfunction
SYSTEM WIRING DIAGRAM	-