Rear Abs Wheel-Speed Sensor Removal/Installation: Notes

1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, verify that there is no twisting in the front ABS wheel-speed sensor.

Fig 1: Rear ABS Wheel-Speed Sensor Components With Torque Specification

Courtesy of MAZDA MOTORS CORP.

PART DESCRIPTION

1	Connector
2	Bolt
3	Rear ABS wheel-speed sensor
4	ABS hole cover (See ABS HOLE COVER REMOVAL NOTE .) (See ABS HOLE COVER INSTALLATION NOTE .)
5	Connector
6	Rear ABS wheel-speed sensor wiring harness (See REAR ABS WHEEL-SPEED SENSOR WIRING HARNESS INSTALLATION NOTE .)