DTC P0894-00: Transaxle Component Slipping: Notes
DTC P0894:00 (FS5A-EL) DETECTION CONDITION AND POSSIBLE CAUSE
| DTC P0894:00 |
Transaxle component slipping |
| DETECTION CONDITION |
- Under the following conditions, turbine rotation speed is 187 RPM or more
- Selector lever position is D or M position
- Accelerator pedal position is released
- Brake pedal position is depressed
- Vehicle speed is 0 km/h {0 mph}
Diagnostic support note
- The check engine light does not illuminate.
- The automatic transaxle warning light illuminates if the TCM detects the above malfunction condition during the first drive cycle.
- PENDING CODE is not available.
- FREEZE FRAME DATA is not available.
- The DTC is stored in the TCM memory.
|
| FAIL-SAFE FUNCTION |
- Inhibits 1GR, 2GR and 3GR
- Maximizes line pressure
- Inhibits feedback control
|
| POSSIBLE CAUSE |
- Shift solenoid A malfunction
- Forward clutch not engaged or slipped
- TCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |