DTC C0051-28; C0051-67: EPS Control Module: Notes

DTC	C0051:28, C0051:67		EPS control module
DETECTION CONDITION		C0051:28 DSC HU/CM detects steering angle neutral position error. C0051:67 DSC HU/CM receives steering angle neutral position reset signal after neutral position was set.
FAIL-SAFE FUNCTION		Refer to "Fail-safe Function Malfunction Contents". (See DTC TABLE [DYNAMIC STABILITY CONTROL (DSC)] .)
POSSIBLE CAUSE		EPS control module malfunction Signal errors from EPS control module due to rough road driving DSC HU/CM malfunction Poor connection at connectors (female terminal)
SYSTEM WIRING DIAGRAM		-