LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> 6 Sport, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Glass/Windows/Mirrors) >> Windshield Removal >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Windshield Removal: Notes

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.5] .)
  2. Remove the following parts:
    1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION .)
    3. Cover (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
    4. Forward sensing camera (FSC) Short-cord (with high beam control (HBC) system) (See FORWARD SENSING CAMERA (FSC) SHORT-CORD REMOVAL/INSTALLATION .)
    5. Forward sensing camera (FSC) (with high beam control (HBC) system) (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
    6. Forward sensing camera (FSC) clip (with high beam control (HBC) system) (See FORWARD SENSING CAMERA (FSC) CLIP REMOVAL/INSTALLATION .)
    7. Rain sensor (with auto light/wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION .)
    8. Laser sensor (with smart city brake support (SCBS)) (See LASER SENSOR REMOVAL/INSTALLATION .)
    9. Auto-dimming mirror (with auto-dimming mirror) (See AUTO-DIMMING MIRROR REMOVAL/INSTALLATION .)
    10. Rearview mirror (without auto-dimming mirror) (See REARVIEW MIRROR REMOVAL/INSTALLATION .)
    11. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
    12. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION .)
    13. Front map light (See MAP LIGHT REMOVAL/INSTALLATION .)
    14. Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION .)
  3. Set the headliner out of the way.
  4. Apply protective tape along the edge of the body.
    NOTE:
    • Overlap and adhere the protective tape to the comers to prevent damage.
    Fig 1: Identifying Protective Tape Applying Area
    G09076674Courtesy of MAZDA MOTORS CORP.
  5. Remove the windshield molding by pulling it outward.
    NOTE:
    • If the windshield molding is difficult to remove, warm the windshield molding using a hot air blower.
    Fig 2: Identifying Windshield Molding Installation Position
    G09787537Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals