Door Locks Systems

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Switch the ignition ON (engine off or on).
Turn the audio unit power on.
Select the following from the audio unit screen.
1. "Setup"
2. "Vehicle"
3. "Door Locks"

Select the following items and change the setting.

ADVANCED KEYLESS ENTRY SYSTEM DESCRIPTION

Audio unit display	Function	Initial setting	Settings	Control module
Auto Re-lock Time	The operation start time of the auto re-lock function can be changed.	30 seconds	30 seconds/60 seconds/90 seconds	Start stop unit
Lock Beep Volume	The keyless beeper volume can be adjusted.	Medium	Off/Low/Medium/High	Start stop unit
Walk Away Lock	The out-of-area (reception area) type auto lock function can be set.	OFF	OFF/ON	Start stop unit

KEYLESS ENTRY SYSTEM DESCRIPTION

Audio unit display	Function	Initial setting	Settings	Control module
Auto Re-lock Time	The operation start time of the auto re-lock function can be changed.	30 seconds	30 seconds/60 seconds/90 seconds	Start stop unit

POWER DOOR LOCK SYSTEM DESCRIPTION

Audio unit display	Function	Initial setting	Settings	Control module
Unlock Mode	2-step unlocking system can be	Once Driver's, Twice: All Doors	Touch Once: ALL Doors/Once Driver's, Twice: All Doors	Start stop unit
Auto Door Lock Mode	Auto door lock function can be changed.	Lock: Driving, Unlock: IGN Off	OFF/Lock When Driving/Lock: Driving, Unlock: IGN Off/Lock When Shifting Out Of P/Lock: Shift From R Unlock: In P	Rear body control module (RBCM)