Continuity Inspection
WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5] .)
- Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION .)
- Inspect for continuity between neutral switch terminals A and B.
- If not as specified, replace the neutral switch. (See
NEUTRAL SWITCH REMOVAL/INSTALLATION
.)NEUTRAL SWITCH SPECIFICATION
Measured condition Continuity Rod pushed Continuity detected Rod not pushed No continuity
- If not as specified, replace the neutral switch. (See
NEUTRAL SWITCH REMOVAL/INSTALLATION
.)