LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2016 >> CX-3 Touring, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake-Air System >> Intake-Air System Removal/Installation >> Intake Manifold Removal Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold Removal Note

  1. Disconnect the MAP sensor/IAT sensor No. connector (Removal of a sensor is not performed). (Refer to MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO. 2 REMOVAL/INSTALLATION .)
  2. Disconnect the harness clip from the intake manifold as shown in the graphic.
    Fig 1: Disconnecting Harness Clip From Intake Manifold
    G10968793Courtesy of MAZDA MOTORS CORP.
  3. Remove the intake manifold.
scientia non olet · About LEMON Manuals