Room light control system (Using M-MDS)

WARNING: This page is about a different car, the 2014 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to DLC-2.
After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the R_BCM.
Select an item name, and then select option.

M-MDS display	Function	Initial setting	Setting contents	Control unit
Interior Light Timeout-Door Open.	The front/rear map light and courtesy light illumination time after any door is opened can be changed. The trunk compartment light illumination time after the trunk lid is opened can be changed.	30 minutes.	Not Adopted./30 minutes./60 minutes./10 minutes.	Rear body control module (RBCM)
Interior Light Timeout-Door Closed.	The front/rear map light and courtesy light illumination time after all the doors are closed can be changed.	15 seconds.	Not Adopted./15 seconds,/7.5 seconds./30 seconds./60 seconds.	Rear body control module (RBCM)