| 1 |
- Close all doors.
- Switch the ignition from ON (engine off or on) to off (LOCK).
- Operate the power window main switch within 40 s after
switching the ignition to LOCK position.
- Does the power window operate?
|
Yes |
Go to the next step. |
| No |
- Inspect the door switches and related wiring harness.
- If above parts are normal, replace the power window main switch, then go to the next step.
- If the above parts are malfunctioning repair or replace the malfunctioning part(s), then go to the next step.
|
| 2 |
- Open any door.
- Switch the ignition from ON (engine off or on) to off (LOCK).
- Operate the power window main switch within 40 s after
switching the ignition LOCK position.
- Does the power window operate?
|
Yes |
- Inspect the door switches and related wiring harness.
- If above parts are normal, replace the power window main switch, then go to the next step.
- If the above parts are malfunctioning repair or replace the malfunctioning part(s), then go to the next step.
|
| No |
Go to the next step. |
| 3 |
- Close all doors.
- Switch the ignition from ON (engine off or on) to off (LOCK).
- Operate the power window main switch within 60 s after
switching the ignition to LOCK position.
- Does the power window operate?
|
Yes |
Replace the power window main switch (power window control unit is malfunctioning.) |
| No |
- IG-OFF timer function operation is normal.
- Perform the auto reverse pinch protection function inspection.
|