DTC P0610-00: Pcm Vehicle Configuration Error: Notes
DTC P0610:00 DETECTION CONDITION AND POSSIBLE CAUSE
| DTC P0610:00 |
PCM vehicle configuration error |
| DETECTION CONDITION |
- PCM data configuration error.
Diagnostic support note
- This is a continuous monitor (CCM).
- The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle.
- FREEZE FRAME DATA (Mode 2)/Snapshot data is available.
- The DTC is stored in the PCM memory.
|
| FAIL-SAFE FUNCTION |
- |
| POSSIBLE CAUSE |
- Configuration procedure has not been completed
- PCM malfunction
|
| SYSTEM WIRING DIAGRAM |
- |