Common Specs & Procedures Index
MAZDA 5 COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | HVAC TECHNICAL DATA | ||
| Torque | See torque specifications in appropriate graphics under BASIC SYSTEM - HVAC | ||
| Axle Nut/Hub Nut | |||
| Front | 175-202 Ft. Lbs. (236-274 N.m) | ||
| Battery | BATTERY INSPECTION | ||
| Brakes | |||
| Bleeding Sequence | see BRAKE FLUID AIR BLEEDING | ||
| Disc Brakes | |||
| Service Specifications | BRAKES TECHNICAL DATA | ||
| Torque | See Torque Specifications in appropriate graphics under CONVENTIONAL BRAKE SYSTEM | ||
| Charging | |||
| Generator | GENERATOR INSPECTION | ||
| Torque | See Torque Specifications in appropriate graphics under CHARGING SYSTEM | ||
| Drive Belts | |||
| Adjustment | Non-Adjustable Serpentine Belt | ||
| Drive Belt Routing | NA | ||
| Engine Cooling | |||
| General Service Specifications | ENGINE TECHNICAL DATA | ||
| Radiator Cap Pressure | 122.6 kPa {1.25 kgf/cm2 , 17.8 psi} | ||
| Thermostat R & I | THERMOSTAT REMOVAL/INSTALLATION | ||
| Water Pump R & I | WATER PUMP REMOVAL/INSTALLATION | ||
| Engine Mechanical | |||
| MZR 2.5L | |||
| Compression | COMPRESSION INSPECTION | ||
| Oil Pressure | [Oil Temperature: 100°C {212°F}] 395-649 kPa {4.03-6.61 kgf/cm2 , 57.3-94.1 psi} [3, 000 RPM] | ||
| Overhaul | ENGINE TECHNICAL DATA | ||
| Torque | See appropriate Component Information in ENGINE MECHANICAL SYSTEM | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 108-116 N.m {11.0-11.8 kgf.m, 79.7-85.5 ft.lbf} | ||
| Fuel System | |||
| Pressure Specification | 54.4-65.2 psi (375-450 kPa, 3.83-4.58 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL LINE PRESSURE INSPECTION | ||
| Fuel Filter Location And R & I | Fuel filter is included in fuel pump unit. See FUEL PUMP UNIT REMOVAL/INSTALLATION and FUEL PUMP UNIT DISASSEMBLY/ASSEMBLY | ||
| Ignition | |||
| Firing Order & Cylinder Identification | ENGINE TECHNICAL DATA | ||
| Ignition Wires (Resistance) | Engine is equipped with coil-on-plug ignition. | ||
| Ignition Wires (Routing) | Engine is equipped with coil-on-plug ignition. | ||
| Spark Plug | |||
| L3Y2 18110, LFJD 18110 | |||
| Gap | L3Y2 18110: Standard: 1.25-1.45 mm {0.049-0.057 in} New spark plug (reference): 1.25-1.35 mm {0.049-0.053 in} LFJD 18110: Standard: 1.25-1.35 mm {0.049-0.053 in} |
||
| Torque | 8-10 Ft. Lbs. (89-123 in.lbf), (10-14 N.m) | ||
| Starting | |||
| Starter | STARTER INSPECTION | ||
| Torque | See Torque Specifications in appropriate graphics under STARTER REMOVAL/INSTALLATION | ||
| Wheel Alignment | |||
| Adjustment Specifications | Front: FRONT WHEEL ALIGNMENT Rear: REAR WHEEL ALIGNMENT |
||
| Torque | See Torque Specifications in text under WHEEL ALIGNMENT | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 88-118 N.m {9.0-12.0 kgf.m, 65-87 ft. lbf} | ||