DTC P0602-00: Pcm Programming Error: Notes

DTC P0602:00 DETECTION CONDITION AND POSSIBLE CAUSE

DTC P0602:00	PCM programming error
DETECTION CONDITION	No configuration data in the PCM. NOTE: If the "PCM CONFIGURATION" is successful, the PCM stores the DTC P0602:00 and illuminates the check engine light (system is normal). Clear the DTC P0602:00 using the M-MDS after the "PCM CONFIGURATION". The check engine light goes out after three drive cycles with no failure (the DTCs remain in PCM). Diagnostic support note This is a continuous monitor (CCM). The check engine light illuminates if the PCM detects the above malfunction condition during the first drive cycle. FREEZE FRAME DATA (Mode 2)/Snapshot data is available. The DTC is stored in the PCM memory.
FAIL-SAFE FUNCTION	-
POSSIBLE CAUSE	Configuration has not been completed PCM malfunction
SYSTEM WIRING DIAGRAM	-