Auto Open/close Function (Driver Side) Inspection
POWER WINDOW SYSTEM PRELIMINARY - AUTO OPEN/CLOSE FUNCTION (DRIVER SIDE) INSPECTION PROCEDURE
| STEP |
INSPECTION |
ACTION |
| 1 |
- Switch the ignition ON.
- Operate the power window using the auto open/close function on the power window main switch.
- Does the power window operate properly?
|
Yes |
Go to the next step. |
| No |
If the power window automatically opens during the closing operation:
- Go to No. 6 DOOR GLASS REVERSES EVEN THOUGH THE GLASS DOES NOT ENCOUNTER A FOREIGN OBJECT WHILE IT IS MOVING UP IN AUTOMATIC MODE.
Others:
- Go to No. 1 THE AUTO OPEN/CLOSE FUNCTION ON THE DRIVER-SIDE POWER WINDOW IS INOPERATIVE.
|
| 2 |
- Operate the power window main switch to the close position while the power window is opening.
- Does the power window operation stop?
|
Yes |
Go to the next step. |
| No |
- Replace the power window main switch (power window control unit is malfunctioning.)
|
| 3 |
- Operate the power window main switch to the open position while the power window is closing.
- Does the power window operation stop?
|
Yes |
- Auto open/close function is normal.
- Perform the IG-OFF timer function inspection.
|
| No |
- Replace the power window main switch (power window control unit is malfunctioning.)
|