LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 6 Grand Touring >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake-Air System >> Intake-Air System Removal/Installation >> Intake Manifold Removal Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold Removal Note

  1. Remove the MAP sensor/IAT sensor No. 2. (See MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR/INTAKE AIR TEMPERATURE (IAT) SENSOR NO. 2 REMOVAL/INSTALLATION .)
  2. Disconnect the harness clip from the intake manifold as shown in the figure.
    Fig 1: Locating Harness Clip Installation Position
    G09786768Courtesy of MAZDA MOTORS CORP.
  3. Remove the intake manifold.
scientia non olet · About LEMON Manuals