Setting method by operation of remote transmitter button

• The following setting can be changed by operation of the remote transmitter button.

M-MDS display	Function	Initial setting	Setting content	Control unit
Lock Beep Volume.	The keyless beeper volume can be adjusted.	Medium	Off/Low/Medium/High	Start stop unit

• Change the setting for the keyless beeper volume referring to the following procedure:

NOTE:

• If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
  • The ignition is switched to ACC or ON (engine off or on).
  • The driver's door is closed.
  • The liftgate is open.
  • The remote transmitter operation is not performed for approx. 10 s.
  • The UNLOCK button on the remote transmitter is pressed.
  • A request switch is pressed.

Fig 1: Keyless Beeper Volume Setting Changing Procedure Flowchart

Courtesy of MAZDA MOTORS CORP.