Continuity Inspection
WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
- Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION .)
- Inspect for continuity between neutral switch terminal A and B.
- If not as specified, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION .)
NEUTRAL SWITCH (SKYACTIV-G 2.5) SPECIFICATIONMeasured condition Continuity Rod pushed Continuity detected Rod not pushed No continuity