LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> 6 Touring, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Power Systems) >> Relay And Fuse Block Disassembly/Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Relay And Fuse Block Disassembly/Assembly

WARNING: This page is about a different car, the 2014 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure.
    Fig 1: Identifying Relay And Fuse Block Service Hole
    G09788492Courtesy of MAZDA MOTORS CORP.
  2. Move the flathead screwdriver in the direction of the arrow (1) shown in the figure, and pull up the relay and fuse block No. 1 in the direction of the arrow (2) shown in the figure to detach the relay and fuse block No. 2 tab from relay and fuse block No. 1.
  3. Detach all the relay and fuse block No. 2 tabs from relay and fuse block No. 1, and remove relay and fuse block No. 1 from relay and fuse block No. 2.
  4. Assemble in the reverse order of disassembly.
    Fig 2: Inserting Tape-Wrapped Flathead Screwdriver Into Service Hole
    G09788493Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals