Indicator Unit Inspection: Notes

Terminal Voltage Inspection

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
2. Remove the following parts:
   1. Center console tray (See CENTER CONSOLE TRAY REMOVAL/INSTALLATION .)
   2. Shift bezel (See SHIFT BEZEL REMOVAL/INSTALLATION .)
   3. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
   4. Selector lever knob (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
   5. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
   6. Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION .)
   7. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
   8. CD player (See CD PLAYER REMOVAL .) (See CD PLAYER INSTALLATION .)
   9. Front console (See FRONT CONSOLE REMOVAL/INSTALLATION .)
   10. Side wall (See SIDE WALL REMOVAL/INSTALLATION .)
   11. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION .)
   12. Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
   13. Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
   14. Hood release lever (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL/INSTALLATION .)
   15. Fuel-filler lid opener lever (See FUEL-FILLER LID OPENER AND LEVER REMOVAL/INSTALLATION .)
   16. Driver-side lower panel (See DRIVER-SIDE LOWER PANEL REMOVAL/INSTALLATION .)
   17. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
   18. Center panel (See CENTER PANEL REMOVAL/INSTALLATION .)
   19. Center lower panel (See CENTER LOWER PANEL REMOVAL/INSTALLATION .)
3. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
4. Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).
   • If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.
     • If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the indicator unit. (See INDICATOR UNIT REMOVAL/INSTALLATION .)