LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> CX-3 Touring, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control System (1 Of 5) >> DTC B10A2-00;A Collision Signal From The Sas Control Module Is Received >> Repeatability Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repeatability Verification Procedure

  1. Switch the ignition ON and leave for 5 s or more.
  2. Clear the DTC from the PCM memory using the M-MDS. (See CLEARING DTC [SKYACTIV-G 2.0] .)
  3. After switching the ignition off, switch the ignition back ON and leave for 5 s or more.
  4. Using the M-MDS, display DTCs and verify that DTC U0151:00 is not displayed. (See ON-BOARD DIAGNOSTIC TEST [SKYACTIV-G 2.0] .)
scientia non olet · About LEMON Manuals