LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2017 >> CX-5 Grand Select, AWD >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic - Engine Control System (1 Of 5) >> DTC P0088-00: Fuel Pressure Sensor Circuit Range/Performance Problem >> Repeatability Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repeatability Verification Procedure

  1. Warm up the engine to allow the engine coolant temperature to reach 80 °C {176 °F} or more.
  2. Start the engine and leave it idling for 1 min.
    NOTE:
    • The target calculated by the PCM is increased and the DTC P0088:00 determination conditions are met by repeating the Step 3 operation.
  3. Shift to 1st gear and accelerate/decelerate the vehicle to 30-50 km/h {19-31 mph}.
    NOTE:
    • Match the engine coolant temperature in the recorded FREEZE FRAME DATA/snapshot data, the vehicle speed, and engine speed values to the best extent possible while driving the vehicle.
  4. Try to reproduce the malfunction by driving the vehicle for5 min based on the values in the FREEZE FRAME DATA/snapshot data.
scientia non olet · About LEMON Manuals